Precautions for Use of Stainless Steel Joints

　　When stainless steel is used continuously for a period of time, it is easy to fail and problems like shedding and leaking occur from time to time. And the same series of imported stainless steel joints will have more problems.

　　Before using stainless steel quick couplings should check for leaks, if they exist they should be immediately stopped and replaced with new products, while confirming that the gas torch valve is in a closed state before connecting. Stainless steel quick couplings should never be used for purposes other than the coupling, such as mixing with metal powder or sand and dust, etc., which may cause the inability to work or leakage. When using, the hose should be inserted firmly into the bottom of the connector and fixed with a hose belt or nut. Avoid using cracked hoses to prevent leakage and dislodgement. If vibration or shock occurs during use, stop working immediately; if forced to work, the durability of the machine will be reduced.

　　The use of stainless steel couplings should also be noted that the maximum pressure limit should not be exceeded, and the fluid used must be clean fluid filtered by a filter, which does not contain other impurities. When working, the temperature should be controlled within the range of use of stainless steel quick couplings to prevent the seal material from wearing or leaking. Do not artificially hit, bend, stretch the joint to prevent the joint from breaking.

　　1, Save time and labor: When disconnecting and connecting the oil circuit by quick coupling, the action is simple and saves time and labor.

　　2, Oil saving: When breaking the oil line, the single valve on the quick coupling can close the oil line, so the oil will not flow out and avoid the loss of oil and oil pressure.

　　3, environmental protection: when the quick coupling is broken and connected, the oil will not spill and protect the environment.

　　4, Unique design of equipment, easy to transport: large equipment or hydraulic tools that need to be easily carried, use quick couplings to split and transport, and then assemble and use after reaching the destination.

　　5, Economic: All the above advantages create economic value for customers.